Aprilia RS 125 Replica - 2008 Specifications and Reviews

Not Rated stars Average rating: Not Rated from 0 votes
.

Replaced by the: Aprilia RS4 125

About the Aprilia RS 125 Replica

The 1999 Aprilia RS125 introduced more rounded fairings, five spoke wheels and a single air duct at the riders side. The pointed lip on the nose was also slightly exaggerated.

Power is provided by a liquid cooled two stroke single cylinder 125cc engine..

General information

CategorySport
ModelAprilia RS 125 Replica
Year2008

Engine and Transmission Specifications

Transmission typefinal driveChain
Gearbox6-speed
Cooling systemLiquid
Fuel systemCarburettor
Bore x stroke54.0 x 54.5 mm (2.1 x 2.1 inches)
Compression12.5:1
Stroke2
Engine typeSingle cylinder
Capacity:124.80 ccm (7.62 cubic inches)
 
 

Physical measures and capacities

Wheelbase1,345 mm (53.0 inches)
Overall width720 mm (28.3 inches)
Overall length1,950 mm (76.8 inches)
Overall height1,135 mm (44.7 inches)
Seat height805 mm (31.7 inches) If adjustable, lowest setting.

Aprilia RS 125 Replica dimensions and frame

Rear brakes diameter220 mm (8.7 inches)
Rear brakesSingle disc
Front brakes diameter320 mm (12.6 inches)
Front brakesSingle disc
Rear tyre dimensions150/60-ZR17
Front tyre dimensions110/70-ZR17
Rear suspension travel120 mm (4.7 inches)
Rear suspensionCast aluminium swing-arm
Front suspension travel120 mm (4.7 inches)
Front suspensionUpside-down hydraulic action telescopic fork
Frame typeCast aluminium sloping twin-spar

Speed and acceleration

Color optionsSBK Replica, GP-1 Replica
Reserve fuel capacity3.50 litres (0.92 gallons)
Fuel capacity14.00 litres (3.70 gallons)
 
 

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

15 hp
Peak Power
9.5s
0-60 mph

Best For

Track70%
City65%
Cornering88%
Daily Riding45%
Touring20%
Passenger15%

Rider Profile

Best ForThis bike suits new and learner riders, particularly those on a restricted or entry-level licence who want a genuine sportbike experience.
PurposeIt's built for learning sharp, precise cornering technique and having fun on twisty roads at accessible speeds rather than for outright straight-line performance.
Rider FitIts tiny 120kg mass and compact dimensions make it extremely easy to flick around and manage for smaller or less experienced riders.
CharacterIt behaves like a miniature race replica, rewarding high revs and a light touch with sharp, eager handling despite modest power.
Not Ideal ForIt's not for taller riders, highway commuters, or anyone needing to carry a passenger or luggage over distance.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2008 Aprilia RS 125 Replica Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 805mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2008 Aprilia RS 125 Replica, with a cramped knee angle of around 70 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.