ATK 450 Enduro - 2008 Specifications and Reviews

The 2008 ATK 450 Enduro is a lightweight single-cylinder enduro bike designed for off-road enthusiasts seeking nimble trail performance and manageable power delivery. Its 449cc four-stroke engine with electronic fuel injection provides reliable power for technical terrain, while the five-speed gearbox and hydraulic clutch offer smooth control. Best suited for intermediate to experienced riders tackling mixed enduro conditions.

2008
Not Rated stars Average rating: Not Rated from 0 votes
.

General information

CategoryEnduro / offroad
Year2008
ModelATK 450 Enduro
 
 

Engine and Transmission Specifications

ClutchMagura Hydraulic
Gearbox5-speed
Cooling systemLiquid
StarterElectric
Ignition12v Battery w Constant Energy Inductive Coil
Fuel controlDOHC
Fuel systemInjection. EFI Fuel Injection
Compression12.3:1
Power48.00
Stroke4
Engine typeSingle cylinder
Capacity:449.00 ccm (27.40 cubic inches)

Physical measures and capacities

Wheelbase1,494 mm (58.8 inches)
Ground clearance361 mm (14.2 inches)
Seat height965 mm (38.0 inches) If adjustable, lowest setting.
Dry weight112.5 kg (248.0 pounds)
 
 

ATK 450 Enduro dimensions and frame

Rear brakes diameter220 mm (8.7 inches)
Rear brakesSingle disc. Dual piston, 220mm Rotor
Front brakes diameter240 mm (9.4 inches)
Front brakesSingle disc. Dual piston, 240mm Rotor
Rear suspension travel320 mm (12.6 inches)
Rear suspensionOhlins POS 12.6' Travel
Front suspension travel305 mm (12.0 inches)
Front suspension46mm Ohlins 12' Travel
Frame typeAluminum Twin-Spar

Speed and acceleration

Power/weight ratio0.4267 HP/kg

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay

Performance Profile & Rider Fit

48 hp
Peak Power

Best For

Track30%
City20%
Cornering70%
Daily Riding20%
Touring25%
Passenger5%

Rider Profile

Best ForThis bike suits experienced off-road riders who are comfortable with a tall seat, light weight, and aggressive enduro handling.
PurposeBuilt specifically for technical enduro trails, tight woods riding, and competitive off-road use rather than street commuting.
Rider FitThe tall 965mm seat height and minimal cushioning demand good rider fitness, leg length, and standing-riding stamina.
CharacterA raw, purpose-built enduro machine with premium Ohlins suspension and a punchy single-cylinder engine that rewards an active, aggressive riding style.
Not Ideal ForThis is not a good choice for new riders, daily commuters, passengers, or anyone seeking a comfortable long-distance touring machine.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2008 ATK 450 Enduro Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 965mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with cannot reach comfortably on the 2008 ATK 450 Enduro, with a cramped knee angle of around 85 degrees and an upright riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.