Maeving RM2 - 2025 Specifications and Reviews

The 2025 Maeving RM2 adds a proper two-up bench seat to the RM1S's 11.1 kW peak, 261 Nm powertrain and 80-mile swappable-battery range, making it Maeving's first electric motorcycle built from the ground up for carrying a passenger. At 145 kg with a 775mm seat height and uprated suspension, it targets riders who found the RM1S's single-seat layout limiting.

2025
Not Rated stars Average rating: Not Rated from 0 votes
.

General information

PriceUS$ 10995. MSRP depends on country, taxes, accessories, etc.
CategoryClassic
Year2025
ModelMaeving RM2

Engine and Transmission Specifications

GearboxAutomatic (direct drive)
Torque261.0 Nm (26.6 kgf-m or 192.5 ft.lbs)
Power9.7 HP (7.2 kW) continuous, 14.9 HP (11.1 kW) peak
Engine detailsBrushless hub motor
Type of engineElectric
 
 

Physical measures and capacities

Overall width920 mm (36.2 inches)
Overall height1050 mm (41.3 inches)
Overall length2110 mm (83.1 inches)
Wheelbase1395 mm (54.9 inches)
Seat height775 mm (30.5 inches) If adjustable, lowest setting.
Dry weight145.0 kg (319.7 pounds)

Maeving RM2 dimensions and frame

Rear tireMitas H-02 3.50x19
Front tireMitas H-02 3.50x19
Rear brakesSingle disc. 240 mm. Single-piston floating caliper.
Front brakesSingle disc. 300 mm. 3-piston floating caliper.
Rear suspensionTwin RSU, 104mm travel
Front suspension37mm non-adjustable fork, 110mm travel

Speed and acceleration

Top speed112.7 km/h (70.0 mph)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
Payload capacity215 kg (474 pounds)
Charging time6 hours (0-100%), 2.5 hours (20-80%)
RangeUp to 129 km (80 miles) combined, up to 145 km (90 miles) in 45mph-limited mode
Battery5.46 kWh (dual 2.73 kWh packs, 51.66V nominal), removable/swappable

Performance Profile & Rider Fit

14.9 hp
Peak Power
70 mph
Top Speed

Best For

Track5%
City60%
Cornering40%
Daily Riding65%
Touring45%
Passenger55%

Rider Profile

Best ForSuited to riders wanting the RM1S's performance and convenience but with a passenger in mind - the dedicated two-up seat is the key differentiator.
PurposeA two-up capable electric commuter and light tourer, sharing the RM1S powertrain in a purpose-built passenger-friendly layout.
Rider FitA 145kg weight and low 775mm seat height keep it approachable even with the added two-up hardware.
CharacterMaeving's most versatile model - the same swappable-battery convenience and retro styling as the RM1S, now genuinely built for two.
Not Ideal ForNot for serious long-distance touring or off-road use.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2025 Maeving RM2 Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 775mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2025 Maeving RM2, with a moderate knee angle of around 115 degrees and a forward-leaning riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.

Related Motorcycle Specifications