HP Power Copper 50 - 2011 Specifications and Reviews

The 2011 HP Power Copper 50 is an entry-level scooter designed for urban commuters and novice riders seeking affordable, fuel-efficient transportation. Its modest 49.5cc four-stroke engine delivers a top speed of 45 km/h, making it ideal for city riding. The automatic CVT transmission and air-cooled design emphasize simplicity and low maintenance.

2011
Not Rated stars Average rating: Not Rated from 0 votes
.

Engine and Transmission Specifications

Emission detailsEuro 2
DrivelineCVT
Transmission type,final driveBelt
GearboxAutomatic
Cooling systemAir
Fuel systemCarburettor
Valves per cylinder2
Top speed45.0 km/h (28.0 mph)
Engine typeSingle cylinder, four-stroke
Capacity:49.50 ccm (3.02 cubic inches)
 
 

CategoryScooter
Year2011
ModelHP Power Copper 50

Brakes, suspension, Frame and wheels

Rear brakesSingle disc
Front brakesSingle disc
Rear tyre dimensions100/80-14
Front tyre dimensions100/80-14

Physical measures and capacities

Fuel capacity7.20 litres (1.90 gallons)
Wheelbase1,285 mm (50.6 inches)
Overall width716 mm (28.2 inches)
Overall length1,882 mm (74.1 inches)
Overall height1,142 mm (45.0 inches)
Seat height810 mm (31.9 inches) If adjustable, lowest setting.
Dry weight80.0 kg (176.4 pounds)

Other specs

MaintenanceFind parts, fluids, filters, maintenance tools and service items on eBay
Color optionsBlack
StarterElectric

Performance Profile & Rider Fit

28 mph
Top Speed

Best For

Track2%
City80%
Cornering20%
Daily Riding65%
Touring8%
Passenger15%

Rider Profile

Best ForIdeal for absolute beginners or learner-permit riders, requiring minimal skill due to its automatic transmission and low, limited top speed of 45 km/h.
PurposeBuilt purely for short-distance urban commuting and light errand-running rather than performance or adventure.
Rider FitVery light and low-slung at 80 kg dry weight, making it easy to handle, push, and park for riders of almost any size or strength.
CharacterA humble, no-frills city scooter that prioritizes simplicity, low cost of ownership, and effortless rideability over excitement.
Not Ideal ForNot suitable for highway travel, long-distance touring, carrying a passenger comfortably, or any rider seeking speed or off-road capability.

Character map is an editorial estimate based on this bike's specifications, not a lab-tested measurement.

Rider Fit Visualizer

2011 HP Power Copper 50 Rider Ergonomics Assessment

Calculated in your browser only - your height/inseam are never sent to our servers.

Feet:

At 810mm, a rider of 175cm with a 79cm (estimated) inseam will reach the ground with both feet flat on the 2011 HP Power Copper 50, with a moderate knee angle of around 100 degrees and a slightly forward riding position.

Data quality: measured. Assumes about 30mm of suspension sag once seated (a typical street-bike rule of thumb - stiffer or softer suspension will vary). This is an approximation from category-typical geometry and generic body proportions, not a measurement of this specific bike or you - sit on it before you buy.

Find bikes that fit your height →

Rider Reviews

Add a Comment


Please Login or Register if you would like to leave a comment.